VIBRATORY ACCESSORIE

 (Cart not provided with deburring machine)

AVT-250

This new production machine will handle a myriad of applications such as deburring, decaling, flash removal, cleaning, polishing, and burnishing. The AVT-250 has a capacity of 2.5 cu. ft. with a discharge chute of 5.0". The tub measures 19.5" x 15" x 15". Machine has a shipping weight of 500 lbs. 15 cu. ft. with overall dimensions of 23" x 27" x 42".

#23-056; AVT-250 (115V/60Hz); $3,550.00

#24-126; AVT-250 (230V/50Hz); $3,695.00

AVT-250 SYSTEM 

The AVT-250 System employs a combination of the RAYTECH AVT-250 2.5 Vibratory Tube machine and the MS-75 automatic parts/media separator. This system truly offers a portable mass finishing work center which makes it ideally suited to cellular manufacturing. Features a quiet, less than 80db motor, heavy duty quick change drive, urethane lined tub, self contained compound rinsing system and virtually instant media/parts separation. Shipping weight is 633 lbs, 32,75 cu. ft.

#23-140: AVT-250 SYSTEM (110V/60Hz); $5,395.00

#24-130: AVT-250 SYSTEM (220V/50Hz); $5,495.00

COMPOUND FINISHING SYSTEMS

FT-20

Incorporates a flow-thru design for compound rinsing. Unit comes with dispensing tank that allows metering of the solution up to 5 hours with a needle valve control. The integral 0-6 hour timer control panel allows tumbler to be directly plugged into base. Use with tumbler models TV-10, TV-18, AV-25 and AV-25SS. Shipping weight is 26 lbs. 2.46 cu. ft.

#23-104; FT-20 w/timer (115V/60Hz); $350.00

#24-150; Ft-20 w/timer (220V/50Hz); $370.00

FT-75

Incorporates a flow-thru design for compound rinsing. Supplied with a 32 quart tank that allows up to 8 hours of compound dispensing utilizing a needle valve control for metering. The integral 0-6 hour control panel allows tumbler to be directly plugged into the base. Recommended for use with precious metals. The FT-75 is designed to accept models AV-40, AV-40SS, TD-40, AV-74, TD-75, AV-75DC, and TD-75DC . Shipping weight is 59 lbs. 7.67 cu. ft.

#23-105; FT-75 w/timer (115V/60Hz); $525.00

#24-151; FT-75 w/timer (230V/50Hz); $565.00

RP-75

Identical to the Model FT-75 except that instead of a solution container, the RP-75 contains an integral, non-maintenance Recerculating pump submerged in the tank. Requires less operator attention, since the 32 quart container is eliminated. Can be used with Models AV-40, AV-40SS, TD-40, AV-75, TD-75, AV-75DC and TD-75DC. Shipping weight is 50 lbs. 7.67 cu. ft.

#23-106; RP-75 w/timer (115V/60Hz); $525.00

#24-155; RP-75 w/timer (230V/50Hz); $625.00

#23-113;PUMP ONLY; $148.00

MS-75

OPTIONAL SEPARATING SCREENS

#23-143; 9/64" ROUND; $195.00

#23-147; 9/32" ROUND; $185.00

#23-150; 5/16" X 1/2" O-ROUND; $185.00

#23-160; 3/8" X 3/4" O-ROUND; $185.00

#23-167; 3/8" ROUND; $185.00

#23-169; 1/2" ROUND; $185.00

#23-171; 5/8" ROUND; $145.00

#23-175; 3/4" ROUND; $145.00

#23-180; 1" ROUND; $135.00

MANUAL SEPARATING SCREENS

Separating screens for manually separating parts from media. 14-1/2" diameter x 2-1/2" deep (approximately .25 cu. ft.). Also useful separating undersized media from useful media. Made of high impact polymer with integral screen. One-piece molding eliminates problems with parts and media sticking at the joints of two-piece screens. Stock no. #23-222 comes with set of five screens and 1 cu. ft. tote container. Screens neat for stowage.

#23-205; 1/4" SCREEN; $21.00

#23-207; 3/8" SCREEN; $21.00

#23-209; 1/2" SCREEN; $21.00

#23-211; 3/4" SCREEN; $21.00

#23-213; 1" SCREEN; $2.00

#23-217; SET OF 5, (1) ea. of the above; $65.00

#23-222; SET OF 5, w/container; $78.00

23-224; CONTAINER ONLY; $26.00

PRICES SUBJECT TO CHANGE WITHOUT NOTICE