INLAND TRIM SAW & BAND SAW BLADES

37.7" (96cm) DIAMOND BLADE

Inland carries a range of blade types to for our DB-100 Band Saw to fit any sawing need! Diamond blades are diamond coated for wet sawing stone, marble, tile, ceramic, and other mineral based materials. Use the WoodCut™ blade to saw most types of woods and wood composites. The MetalCut™ Blade saws non-ferrous metals, plastics, leather and similar materials.

KEY FEATURES

• Diamond blades have the finest quality diamond crystal
• The diamond is bonded to stainless steel using techniques developed and proven for over two decades.
• Designed for maximum sawing smoothness and speed.

Information Additional Information
           ADDITIONAL INFORMATION
Additional Information
Additional Information Blade Length: 37.7" (96cm) Blade Depth: .130" Blade Thickness: .022" Approx. Kerf: .030"

Available Parts and Accessories:

•  BladeSert? Blade Guide. #90022
• You should always install a new BladeSert? whenever you install a new blade. The BladeSert? will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert? allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert? for wear each time you use the saw. Immediately replace the BladeSert? when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" (enhanced detail image) it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
• 96cm WoodCut 6" Blade for Band Saw #90001
• 96cm MetalCut 6" Blade for Band Saw #90003
• Saws dozens of materials, wet or dry. Comes with a diamond blade for sawing glass, ceramic, tile, stone, marble, porcelain, and more. Inland DB-1002 Diamond band Saw
• Saws woods, wood composites, and similar products with a standard WoodCut? blade. Ideal for general hobby, scale models, and more. Inland DB-100 Hobby Band Saw

# 90007; 37.7" (96cm) Diamond Blade; $68.00

37.7" (96cm) METAL CUT BLADE

Inland carries a range of blade types to for our DB-100 Band Saw to fit any sawing need! The MetalCut™ Blade saws non-ferrous metals, plastics, leather and similar materials.

KEY FEATURES

• Cut on precision equipment.
• Blade tooth shape, angle, and sharpness are true to each other within .003". 24 Teeth Per Inch. .130" depth, .012" thick.
• Designed for maximum sawing smoothness and speed.

ADDITIONAL INFORMATION

•  BladeSert? Blade Guide #90022
• You should always install a new BladeSert? whenever you install a new blade. The BladeSert? will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert? allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert? for wear each time you use the saw. Immediately replace the BladeSert? when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" (enhanced detail image) it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
•  96cm WoodCut
•  6" Blade for Band Saw #90001
•  96cm Diamond Blade for Band Saw #90007
•  Saws dozens of materials, wet or dry. Comes with a diamond blade for sawing glass, ceramic, tile, stone, marble, porcelain, and more. Inland DB-1000 Diamond Saw Blade
•  Saws woods, wood composites, and similar products with a standard WoodCut? blade. Ideal for general hobby, scale models, and more. Inland DB-100 Hobby Band Saw

# 90003;

37.7" (96cm) WOOD CUT BLADE

Inland carries a range of blade types to for our DB-100 Band Saw to fit any sawing need! The WoodCut™ blade to saw most types of woods and wood composites.

KEY FEATURES

• Blades are cut on precision equipment.
• Blade tooth shape, angle, and sharpness are true to each other within .003". 14 Teeth Per Inch. 022" wide blade with approximately 0.32" of kerf. .130" depth.
• Designed for maximum sawing smoothness and speed.

Blade Length: 37.7" (96cm
.022" wide blade with approximately 0.32" of kerf
.130" deep
 

# 90001; 37.7" (96cm) WoodCut Blade; $20.00
 

DB-100 BAND SAW BLADESERT™ BLADE GUIDE

Our unique BladeSert™ eliminates the need for upper blade guides by providing blade support where it most crucial.

KEY FEATURES

• Supports the blade at the point of sawing for better control.
• Helps keep the blade tracking straight and true while sawing.
• Allows you to make more accurate cuts.
• Works equally well with DiamondCut™, WoodCut™, and MetalCut™ blades.

Use with standard DB-100 Diamond Band Saw aluminum table

You should always install a new BladeSert? whenever you install a new blade.

The BladeSert? will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert? allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert? for wear each time you use the saw. Immediately replace the BladeSert? when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" (enhanced detail image) it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
 

#90022; DB-100 Band Saw BladesertL™ Blade Guide: $2.75

6 ½" x .020" Trim Saw Blade - Standard

Inland carries a range of blade types to fit any sawing need! Our standard DiamondTuff™ blade has a substrate thickness of .020" and is suitable for cutting hard materials like agates where the price of the material is generally low and material loss is not very important.

KEY FEATURES

• All blades are crafted from hardened and tempered, high-carbon spring steel.
• Arbor holes are cut within minus .0000" and plus .00075" tolerance.
• Standard blade has diamond substrate thickness of .020"
• Diamond coated blades contain genuine diamond crystals bonded to the perimeter using techniques developed and proven for over two decades.

# 40960; 6 ½" x .020" Trim Saw Blade - Standard; $28.00 ea.

METALCUT 6 ½" TRIM SAW BLADE

Inland carries a range of blade types to fit any sawing need! The MetalCut™ blade for the SwapTop™ Trim saw is made to saw non-ferrous metals, plastics, leather and similar materials.

KEY FEATURES

• All blades are crafted from hardened and tempered, high-carbon spring steel.
• Arbor holes are cut within minus .0000" and plus .00075" tolerance.
• Toothed blades are cut on precision equipment.
• Blade tooth shape, angle, and sharpness are true to each other within .003", for maximum sawing smoothness and speed. 24 Teeth Per Inch, Flat Teeth.

• 6-1/2 " (16.51 cm) WoodCut? Blade (10TPI*, Offset Teeth) #90964
•  6-1/2" (16.51 cm) Diamond Coated Blade #40960
•  6-1/2" (16.51 cm) Diamond Blade (.012" diamond substrate thickness) #40961
•  6-1/2" (16.51 cm) Diamond Blade (.008" diamond substrate thickness) #40968
• Products to enhance the operation and performance of your SwapTop? Saw and SwapTop? Shaper. Swap Top saw Accessories

# 90960; MetalCut 6 ½" Trim Saw Blade; $20.00 ea.
 

WOODCUT 6 ½" TRIM SAW BLADE

Inland carries a range of blade types to fit any sawing need! The WoodCut™ blade for the SwapTop™ Trim saw is made to saw to saw most types of woods and wood composites. 10 Teeth Per Inch, Offset Teeth.

KEY FEATURES

• All blades are crafted from hardened and tempered, high-carbon spring steel.
• Arbor holes are cut within minus .0000" and plus .00075" tolerance.
• Toothed blades are cut on precision equipment.
• Blade tooth shape, angle, and sharpness are true to each other within .003", for maximum sawing smoothness and speed.

1/2" (1.27 cm) arbor hole
.023" Spring Steel
.032" total thickness including tooth pattern
10TPI*, Offset Teeth

ADDITIONAL INFORMATION

•  6-1/2" (16.51 cm) MetalCut? Blade (24TPI*, Flat Teeth) #90960
• 6-1/2" (16.51 cm) Diamond Coated Blade #40960
• 6-1/2" (16.51 cm) Diamond Blade (.012" diamond substrate thickness) #40961
•  6-1/2" (16.51 cm) Diamond Blade (.008" diamond substrate thickness) #40968
•  Products to enhance the operation and performance of your SwapTop? Saw and SwapTop6 Shaper. Swap Top Saw Accessories

# 90964; WoodCut 6 ½" Trim Saw Blade; $20.00 ea.