GY-ROCK VIBRAHORN
Vibrating Tumblers

JOHNSON BROTHERS
For jewelry finishing or rock tumbling these machines are: the fastest!! the gentlest!! the easiest to use and clean!! unequaled finishes!! uses less energy!! does more work!!
All models are two speed for controlled finishes. Unique upper and lower eccentric weights are adjustable to run dense loads, like steel shot. Your motor and bearings last longer because of the belt drive. These machines really do the job day in and day out.
2 speed for controlled finishes.
Unique upper and lower eccentric weights are adjustable to run dense loads, like steel shot.
Motor and bearings last longer because of belt drive.
These machines really do the job day in and day out.
ROCK CAPACITY
Model A 10 lbs.
Model B 3 lbs.
Model C 40 lbs.
VOLUME CAPACITY
Model A 3 Quart
Model B 1 Quart
Model C 3 Gallon
GY-S; Complete 1 Quart 3 lb. Tumbler; $180.00
GY-M; Complete 3 Quarts/ 10 lbs.; $360.00
GY-L; Complete 3 Gallons/ 40 lbs.; $650.00
ACCESSORIES
PIGGYBACKS-Double or triple your output by just adding one or two kits.
Used on GY-S only
GY-PBK; Piggy Back Kit; $19.00
Use on all models
GY-BS; Bowl; $10.00
*GY-FTS; Flow Thru Bowl; $18.75
GY-CBS; Drive Belt; $3.75
*GY-RS; Re-circulating System; $89.00
GY-SS; Suspension Springs; $3.50
GY-MS; Motor; $92.00
GY-SS; Spider; $45.00
Used on GY-L only
GY-H; High Bowel; $125.00
GY-HD; High Bowl Tie Down; $5.25
*Flow-Thru System:
For metal finishing is easily added. Simply install a Flow-Thru Bowl, which has a drain and a hose. Now you can constantly flush the media during cycles. Also makes clean-up and rinsing very easy.
|
SEAMLESS FULL TRIPLE ACTION BARREL - GEODESIC
tumbling barrel gives true triple action. Load turned six times during
each revolution of the barrel ... abrasives and load can’t hang in one
spot ... uses up to 1/3 less abrasives ... reduces tumbling time up to
50%. Barrels easily cleaned with rinse under the faucet. No belts ... no
pulleys ... just plug in ... put in stones, abrasives, water ... flip
the switch!! Heavy duty fan cooled motor ... thermal overload ... 4 in
vented leak proof cap, convenient carrying handle. Super fast for stone
polishing or jewelry burnishing. 115V 60Hz... complete ready to run ...
6 pound capacity. 430.006: VT-6 Complete; $436.00 433H; VT-6 Barrel; $108.00 GRIT KIT
JB4ST; GRIT KIT, 60/90; 120/220; PRE-POLISH; FINAL POLISH; $20.00
REVISED: 02/20/2008 1(800) 820-3612 Copyright© 1998/2008 ® NATION ENTERPRISES Owned and operated by Russ & Betty Nation
|