VI-BRO-LAPS

Both the 20" and 27" Vi-Bro-lap models give you the satisfaction of achieving flat surfaces on geode half's, agate, petrified wood and other material, yet relieves you of the necessity for constant attention to the lapping process.

The Vi-Pro-lap can accommodate  a number of specimens at the same time. The tempered aluminum lap plate is grooved in a criss-cross pattern.  This permits abrasive partials to circulate between the lap plate and the work piece so that the abrasive it self is continuously being crushed to a smaller size. This reduces the number the number of grit sizes which are needed.

When the work piece surface is ground  flat and satin smooth, the lap plate is turned over to the other side on which a polishing pad is cemented. Using a polish compound on this pad, a fine mirror like finish is produced on the work piece.

SPECIFICATIONS

• Lap plates are manufactured from heat treated material aluminum alloy to produce a  tough, wear-resistant-surface. Each surface has a milled V-grooves in a square grid pattern.

• Suspension is controlled by aircraft strength cable, adjustable for fine leveling to keep work pieces evenly distributed over the lap plate surface'

• 20VL measures 21"wide x 21" deep x 21" high

• 27"VL measures 28" wide x 28" deep x 30" high

• Frame is welded, fabricated steel for stability.

• Comes with 1/3 HP motor, polish pad and galvanized circle.

Export model available.

20" Model 20 VL

#620-41-108415; Model w/ !/3 HP 110 V, 60 Hz motor; Shp. Wt. 176 lbs.; $1,860.00

#620-41-108415X; Export model w/1/3 HP 220V, 60 Hz motor; Shp. Wt. 176 lbs.; $2,060.00

# 620-41 C20;Crating fee-machine; $177.00

#621-41-117176; Replacement plate w/pad; Shp. Wt. 28 lbs.; $598,00

27" Model 27 VL

#621-41-117176; Nylon polish pad cemented to galvanized circle; Shp, Wt. 5 lbs.; $56.00

#621-4111701; Nylon polish pad; Shp. Wt. 1 lb.; $17.00

#690-41-100438; Cable & eye bolt kit; Shp. Wt. 8 ozs.; $18.00

#689-41-104120; Rubber foot; Shp. Wt. 6 ozs.; $11.00

690-90-4120; Flange bearing; Shp. Wt. 2lbs.; $67.00

#690=90-5684; Pillow block bearing; Shp. Wt/ 2 lbs,; $47.00

#621-118190C; Crating fee 27VL plate; $60.00

A UNIQUE DOUBLE ACTION WORKS FOR YOU

While the Vi--Bro Lap plate oscillates, work-piece rotates! This gives faster grinding surface speed; distributes abrasives, assures a flat polished surface, and equalizes wear on the top plate. Allow 3-4 weeks for delivery. We have most parts for older Vi0Pro Laps. Call for information.

PRICES SUBJECT TO CHANGE WITHOUT NOTICE

MINIMUM ORDER $50.00