SLIP JOINT HAND PIECES

SLIP JOINT HAND PIECES FOR EUROPEAN HAND PIECES

Slip joint hand pieces will fit all European made flexible shaft machines with "slip joint" connections. They can not be used with the standard "QD" style flex shaft on all Foredom flexible shaft machines. A European style flexible shaft and sheath is available to replace the standard shaft and sheath on all Foredom machines. A special motor coupling is also required.

#10810A; European Style Shaft & Sheath; $125.00

#UA540; European Motor Coupling & Connecter Kit; $16.50

#10811; Complete Conversion Assembly; $135.00

GENERAL PURPOSE

BURRS NOT INCLUDED

Comes with 2.35mm (3/32") and 3mm collets, and a chuck wrench set. see No. 8 for full description. 5-1/2" log, 5/8" Dia.; Shp. Wt. 4.65 ozs.

#8SJ; Hand Piece;  $59.00

-------------------------------------------

Comes with 2.35mm (3/32") and 3mm collets, and a pin and chuck wrench set. See No.28 for full description. 5-3/4" long. 3/4" Dia., 1/2" Dia. (taper) Shp. Wt. 4.70 ozs.

#28SJ; Hand Piece; $49.00

-----------------------------------------

  Comes with geared 3-jaw  #0 chuck with 0-4mm (5/32") capacity an CK-O chuck key. see No. 30 fr full description. 5-3/4" long, 1" Dia.; Shp. Wt.9.55 ozs.

#30SJ; Hand Piece; $65.00

------------------------------------------

Comes with 2.35mm (3/32"), 3mm and 6mm collets, and pin and chuck wrench set. See No. 44T for full description. 6-1/4"long, 1" Dia. (taper); Shp. Wt. 9.04 ozs.

# 44TSJ; Hand Piece; $56.00

QUICK CHANGE

BURRS NOT INCLUDED

Quick Change 18SJ is suitable for use only  with 2.35mm (3/32") shank burrs or mandrels. See No. 18 for full description. 6-3/8" long,  19//32" Dia.; Shp. Wt. 4.9 ozs.

#18SJ;  Hand Piece; $140.00

------------------------------------------

Quick Change 20SJ is suitable for use only with 2.35mm (3/32") shank burs or mandrels. See No.20 for full description.5-1/2" long, 51/64" Dia. Shp. Wt. 2.95 ozs.

#20SJ; Hand Piece; $79.00

--------------------------------

Quick Change 52SJ is suitable for use only with 2.35mm (3/32") shank burs or mandrels. See No. 52 for  full description. 5-1/2" long,  51/64" Dia. Shp. Wt. 5.8 ozs.

52SJ; Hand Piece; $140.00

HAMMER

BURRS NOT INCLUDED

Comes with threaded anvil point and pin to tighten point see #15 for full description.; Shp. Wt. 4.9 Ozs. 3.55 ozs. Shp. Wt; 3.55 ozs.

15SJ; Hand  Piece; $129.00

SPEED INCREASING

BURRS NOT INCLUDED

Comes with  3mm collet unless other wise specified See No. 35 for full description.6-1/2" long, 1-3/16" long, 1-3/16" Dia. Wt. 3.55 ozs. Shp. Wt. 10.7 ozs.

#35SJ; Hand Piece; $179.00