Model
18RLSROTATING DISC FLAT LAPS
If you need to precision grind and polish a flat surface on stone, glass or optics, the rotating disc laps will do the job.
These rotating flat laps are built to fulfill the fundamental requirements of precision lapping. You get maximum stability and wheel balance. Lap plates are standard models are cast iron, machined to exacting tolerances and grooved with concentric V-groove circles for retention of the abrasive charge. Your surfaces will be FLAT. Rotating laps work faster than the oscillating type machine, but the workpiece must be held and kept in constant motion through out the process.
FEATURES FOR STANDARD RLS MODELS
Model 12RLSModel
18RLS
Models come with motor, adjustable drip tank, and cast iron plate.
Powder coated, heavy duty fabricated steel plate boxes. The 18RLS's measure 24" x 24" x 34" with 7-3/4" deep tank. The 12 RLS's are 15" x 15" x 13-3/4" with a 6-3/4" deep tank.
Water reservoir and adjustable valve to regulate flow of water abrasive mixture on standard machines. The drip spout can be easily moved over the rotating disc.
Above shaft ia 1". Bearings are 1" factory lubricated and sealed to prevent contamination.
Variable speed machines allow instant speed adjustments through use of variable speed motor and controller.
Machines and extra 18RLS lap must be crated for shipment.
12" MODEL
#620-40-121897; 12RLS Standard 1/3 HP 110V-60Hz; Shp. Wt. 144 lbs.; $1,570.00
#*620-40-121897V; 12RLSV Variable speed 1/2HP VS**; Shp. Wt.150 lbs.; $2,650.00
#12RLSX ;Standard Export 1/3 HP 220V-50Hz; Shp. Wt. 135 lbs,; $1,785.00
#621-40-117086; Cast iron back plate for standard laps; Shp. Wt. 25 lbs,; $465.00
#620-40-C12; Creating for machine; $100.00
*Variable speed machines are SPECIAL ORDER. Allow 4-6 weeks for delivery.
**Shipped via truck
18" MODEL
#620-40-121889**; 18RLS Standard 3/4HP 110V-60Hz; Shp. Wt. 291 lbs.; $2,390.00
#*620-40-121990V**; 18RLSV Variable speed; 1/4HP VS**; Shp. Wt. 291 lbs.; $3,665.00
#620-40-121889X; 18RLSX Standard Export; 3/4HP 220V-50 Hz; Shp. Wt.291 lbs.; $2,590.00
#621-40-117077; Cast iron back plate for standard laps; Shp. Wt. 76 lbs.; $734.00
#620-40C18; Crating fee machine; $195.00;
#622-40-117077C; Crating fee 18RLS plate; $39.00
** Shipped by truck.
MINIMUM ORDER $50.00
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
REVISED: 01/03/2008
1 (800) 820-3612
Copyright© 1998/2008 źNATION ENTERPRISES
Owned and operated by Russ & Betty Nation